View PMEG4010CEJ_332076.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
Rev. 01 -- 13 April 2006 Product data sheet
1. Product profile
1.1 General description
Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for stress protection, encapsulated in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.
1.2 Features
I I I I Forward current: 1 A Reverse voltage: 40 V Very low forward voltage Very small and flat lead SMD plastic package
1.3 Applications
I I I I I Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Reverse polarity protection Low power consumption applications
1.4 Quick reference data
Table 1. Symbol IF VR VF
[1]
Quick reference data Parameter forward current reverse voltage forward voltage IF = 1000 mA
[1]
Conditions Tsp 55 C
Min -
Typ 490
Max 1 40 570
Unit A V mV
Pulse test: tp 300 s; 0.02.
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
2. Pinning information
Table 2. Pin 1 2 Pinning Description cathode anode
[1]
Simplified outline
1 2
Symbol
1 2
sym001
[1]
The marking bar indicates the cathode.
3. Ordering information
Table 3. Ordering information Package Name PMEG4010CEJ SC-90 Description plastic surface-mounted package; 2 leads Version SOD323F Type number
4. Marking
Table 4. Marking codes Marking code EP Type number PMEG4010CEJ
5. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VR IF IFRM IFSM Ptot Tj Tamb Tstg
[1] [2]
Conditions Tsp 55 C tp 1 ms; 0.25 square wave; tp = 8 ms Tamb 25 C
[1] [2]
Min -65 -65
Max 40 1 7 10 350 830 150 +150 +150
Unit V A A A mW mW C C C
reverse voltage forward current repetitive peak forward current non-repetitive peak forward current total power dissipation junction temperature ambient temperature storage temperature
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
2 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
6. Thermal characteristics
Table 6. Symbol Rth(j-a) Rth(j-sp)
[1]
Thermal characteristics Parameter thermal resistance from junction to ambient thermal resistance from junction to solder point Conditions in free air
[1][2] [1][3] [4]
Min -
Typ -
Max 350 150 55
Unit K/W K/W K/W
For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating are available on request. Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. Soldering point of cathode tab.
[2] [3] [4]
7. Characteristics
Table 7. Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter forward voltage IF = 1 mA IF = 10 mA IF = 100 mA IF = 500 mA IF = 700 mA IF = 1000 mA IR reverse current VR = 5 V VR = 10 V VR = 40 V Cd
[1]
Conditions
[1]
Min -
Typ 210 270 340 420 450 490 0.8 1.1 6 69
Max 240 310 390 490 520 570 50 77
Unit mV mV mV mV mV mV A A A pF
diode capacitance
Pulse test: tp 300 s; 0.02.
VR = 1 V; f = 1 MHz
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
3 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
104 IF (mA) 103
(1) (2) (3) (4) (5)
006aaa755
105 IR 10 (A) 103 102 10
(4) 4 (1) (2) (3)
006aaa756
102
1 10 10-1 1 10-2 10-3 10-1 0.0 10-4 0.2 0.4 0.6 VF (V) 0.8 0 10 20 30 VR (V) 40
(5)
(1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C
(1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C
Fig 1. Forward current as a function of forward voltage; typical values
160 Cd (pF) 120
Fig 2. Reverse current as a function of reverse voltage; typical values
006aaa757
80
40
0 0 10 20 30 VR (V) 40
Tamb = 25 C; f = 1 MHz
Fig 3. Diode capacitance as a function of reverse voltage; typical values
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
4 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
8. Package outline
1.35 1.15 1 0.5 0.3 0.80 0.65
2.7 2.3
1.8 1.6
2 0.40 0.25 Dimensions in mm 0.25 0.10 04-09-13
Fig 4. Package outline SOD323F (SC-90)
9. Packing information
Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PMEG4010CEJ
[1]
Package SOD323F
Description 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 -115 10000 -135
For further information and the availability of packing methods, see Section 14.
10. Soldering
3.05 2.80 2.10 1.60
solder lands solder resist
1.65
0.95
0.50
0.60 occupied area solder paste
0.50 (2x)
001aab169
Reflow soldering is the only recommended soldering method. Dimensions in mm
Fig 5. Reflow soldering footprint SOD323F (SC-90)
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
5 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
11. Mounting
43.4 43.4
10 0.6 0.6 0.6 0.6 0.5 0.6 40 0.6 0.5 10 40
Dimensions in mm
006aaa487
Dimensions in mm
006aaa488
PCB thickness = 1.6 mm
PCB thickness = 1.6 mm
Fig 6. FR4 PCB, standard footprint
Fig 7. FR4 PCB, mounting pad for cathode 1 cm2
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
6 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
12. Revision history
Table 9. Revision history Release date 20060413 Data sheet status Product data sheet Change notice Supersedes Document ID PMEG4010CEJ_1
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
7 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
13. Legal information
13.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.semiconductors.philips.com.
13.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Philips Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Philips Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
malfunction of a Philips Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Philips Semiconductors accepts no liability for inclusion and/or use of Philips Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- Philips Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.semiconductors.philips.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Philips Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
13.3 Disclaimers
General -- Information in this document is believed to be accurate and reliable. However, Philips Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- Philips Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- Philips Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
14. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
PMEG4010CEJ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 13 April 2006
8 of 9
Philips Semiconductors
PMEG4010CEJ
1 A very low VF MEGA Schottky barrier rectifier in a SOD323F package
15. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 3 5 5 5 6 7 8 8 8 8 8 8 9
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) Koninklijke Philips Electronics N.V. 2006.
All rights reserved.
For more information, please visit: http://www.semiconductors.philips.com. For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com. Date of release: 13 April 2006 Document identifier: PMEG4010CEJ_1

▲Up To Search▲

Price & Availability of PMEG4010CEJ

	To Download PMEG4010CEJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .